Renault GAMA KANRO KOMBI 5000 WUKO FOR CHANNEL CLEANING combination sewer cleaner
Niwy
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+48 697 07...
+48 697 070 670
Poland
Poland, Niwy
Poland, Niwy
Poland, Niwy
Poland
Poland, Niwy
Poland, Niwy
Poland
Poland, Niwy
Poland, Niwy
Poland, Niwy
Poland, Jarosław
Poland, Nowiny
Poland, Niwy
Poland
Poland
Poland, Niwy
Poland, Bodzentyn
YEAR OF PRODUCTION 2018
Mileage 20 400 km !!!!!!
Capacity: 5000 l, lifted, stacked tank
4000 l dirty water tank
Clean water tank 1000 l
Radio remote control
Reversing camera
KanRo Kombi 5000 is a suction and rinsing device for pressure cleaning of sewage systems
The vehicle is intended for:
* cleaning channels up to 100 m using a high-pressure water system, with the possibility of sucking impurities into the sludge tank at the same time, using a suction and pressure system,
* removing dirt and sediments from street inlets and sewer manholes,
* washing the facade and small ground objects, such as monuments, bus shelters, as well as work stations and the vehicle, using a water gun.
High pressure pump:
UDOR 120 l / min. at 160 bar
Suction pump Vacuum pump:
MORO KAISER PM110 984m3 / h
The suction and high-pressure pump is driven by a system of V-belts from the crankshaft of the independent engine. The pumps are equipped with electromagnetic clutches that enable them to be turned on and off from the control panel. Thanks to this design, both pumps can work simultaneously or individually according to the configuration: High-pressure pump works with disconnected suction pump or Suction pump works with disconnected high-pressure pump or Both pumps work simultaneously.
The drive system allows the simultaneous operation of both pumps (suction and pressure) at full operating parameters.
The clean water compartment is equipped with:
- drain connection with valve,
- filler valve,
Waste water compartment equipped with:
- overpressure valve,
- pressure indicator,
The rear cover of the tank is opened
On the bottom there is a side mounted reel with a high-pressure hose that can be manually tilted by 180˚. The hydraulically rotating drum is equipped with a smooth adjustment of the winding / unwinding speed and a device for manual laying of the pressure hose on the drum.
Hose length in diameter
NW 19 - 3/4 '100 m
NW13-1 / 2 '80 m
WINTER PROTECTION
In order to work in sub-zero temperatures, the device is equipped with a water circulation system. When traveling to the workplace, the water circulates in a closed circuit under low pressure, which prevents it from freezing. After the works are completed, this system is activated when you return to the company.
A car in a superb technical condition!
IT IS AWESOME!
IN PERFECT CONDITION!
100% accident-free!
MORE INFORMATION AT NO.
show contacts (ENG.RUS.POL) WhatsApp and Viber
CAUTION.
This announcement is only commercial information and does not constitute an offer pursuant to Art. 66, §1 of the Civil Code. The seller is not responsible for any errors or out-of-date advertisements