New Fliegl VTS 400 low loader trailer
Triptis
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
35,270 lb
Net weight
8,818 lb
Germany, Triptis
30,530 lb
Net weight
9,149 lb
Germany, Triptis
66,490 lb
Net weight
19,490 lb
Germany, Triptis
73,040 lb
Net weight
12,950 lb
Germany, Triptis
49,960 lb
Net weight
16,180 lb
Germany, Triptis
72,310 lb
Net weight
13,670 lb
Germany, Triptis
32,850 lb
Net weight
13,450 lb
Germany, Triptis
53,790 lb
Net weight
12,350 lb
Germany, Triptis
73,500 lb
Net weight
10,270 lb
Germany, Triptis
65,630 lb
Net weight
11,530 lb
Germany, Triptis
52,690 lb
Net weight
13,450 lb
Germany, Triptis
36,240 lb
Net weight
7,848 lb
Germany, Triptis
4,079 lb
Dumping height
9.51 ft
Germany, Kastl
48,720 lb
Net weight
17,420 lb
Germany, Triptis
46,960 lb
Net weight
19,180 lb
Germany, Triptis
63,160 lb
Net weight
14,000 lb
Germany, Triptis
70,550 lb
Net weight
13,230 lb
Germany, Triptis
Germany, Triptis
33,070 lb
Net weight
6,614 lb
Germany, Triptis
44,310 lb
Net weight
8,598 lb
Germany, Triptis
Trailer parts
Functionality: fully functional
Location: Pramet, Österreich
Note: archive photos!
3 additional pairs of folding lashing rings, 10 t each: 1 on the gooseneck, 1 at the start of the well deck recessed on the inside of the longitudinal beams, 1 behind the last axle recessed in the floor
Laser-aligned axles/running gear: reduced tyre wear and fuel consumption
#Low-loader trailer chassis
Welded steel construction
Turntable with heavy-duty ball-bearing slewing ring
Folding rear supports
2 wheel chocks with holders
Aluminium side underrun protection
Rear mud flaps across full width (not in combination with forklift mounting)
Half-shell mudguards on axles 1 + 2 with anti-spray mud flaps behind each axle
Anti-spray mud flaps in front of and behind axles 3 and 4
Excavator arm recess from the rear axles to the rear end
approx. 1800 mm long
approx. 650 mm wide
approx. 150 mm deep
2 pairs of lashing holes
5 t each
in the excavator arm recess on the side of the longitudinal frame
approx. 300 mm from the front and approx. 200 mm before the beavertail
1 plastic toolbox
w=600 / h=425 / d=460 mm
lockable
Storage box recessed into the gooseneck floor with lid
W=720 mm / L=520 mm / D=170 mm
Extendable widening to 3000 mm (not in beavertail)
(Track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2550 mm)
Storage compartment for timber planks beneath the low-loading deck
70 mm timber planks for widening to 3000 mm
#Lashing points low-loader
1 pair of lashing cut-outs recessed in the longitudinal beam at the front on the gooseneck
10 t each
4 pairs of lashing holes in the outer frame
5 t each (for lashing straps)
9 pairs of lashing mushrooms recessed on top and side of the outer frame
10 t each
#Towing equipment turntable trailer
Drawbar with certified 50 mm towing eye
Spring-assisted drawbar height adjustment
#Axles + suspension
Drum brake axles
manufacturer's choice
Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load compensation front and rear
#Wheels and tyres
235/75 R 17.5"
Twin steel rims
factory silver
TPMS tyre pressure monitoring system per ECE R 141
display in towing vehicle via EBS
#Braking system
2-line compressed-air braking system
Spring-brake parking brake
2 coupling heads at the front
protected against mix-up
12-24 V EBS
electronic braking system with EBS connector at the front
Axle load detection via EBS CAN bus signal
for display in the driver's cab
#Electrics
12-24 V
LED multi-chamber lights
yellow LED side lighting
LED number plate lighting
Yellow LED side lighting coupled with the indicators (flashing side marker lights)
2 white LED front position lights
2 white/red LED rear outline marker lights
2 x 7-pin plugs at the front
protected against mix-up
1 LED rotating beacon with holder
2 pairs of LED-illuminated warning boards
extendable to 3000 mm
#Floor
Gooseneck at the front with steel/chequer plate covering
then approx. 70 mm softwood floor
steel/chequer plate in the wheel arch area
Beavertail with 70 mm softwood floor
#Loading ramps
Steel ramps 3000 mm long
750 mm wide
laterally adjustable
Ioce Aavxdeu D Dylxotn
Additional ramp lock
folding at the bottom
Timber-covered
Hydraulically operated via the towing vehicle's PTO with throttle valve
Hydraulic connection with SVK plug NW 10/3